Products

DESCRIPTION

Basic Info.

Model NO.	38x15x4.2mm, etc.
Craft	Pultrusion
Application	Can Be Used as Load Beam, etc.
Material	Resin, Fiberglass, Agents, etc.
Transport Package	Pallet, Plastic Bag, Carton, etc.
Specification	38x15x4.2mm, etc.
Trademark	JLF
Origin	Nanjing, China
HS Code	3626909090
Production Capacity	500 Tons/Year

Product Description

Nanjing Jinglue FRP CO.,LTD is a professional designer and manufacturer engaged in some normal FRP pultruded profiles, including polyester FRP, vinyl FRP, epoxy FRP, etc. In recent years, we also made great progress in polyurethane FRP, CFRP, etc.
Our normal pultruded profiles are manufactured with the pultrusion process after choosing the correct raw materials' combinations. The raw materials include different resin matrix, fiber reinforcements, some additives,etc.
Following is some introduction of our normal FRP Pultruded profiles:
1. Properties of FRP pultruded profiles
A. High strength
FRP is stronger than structural steel on a pound-for pound basis. It has been used to buildings, walkway, sub-floors and platforms.
B. Light weight
FRP is 20-25% the weight of steel and 70% the weight of aluminum. FRP are easily transported, handled and lifted into place. Total structures can often be preassembled and shipped to the job site ready to installation.
C. Anti-corrosion
FRP will not rot and are impervious to a broad range of corrosive elements. This feature makes FRP a natural selection for indoor or outdoor structures in pulp and paper mills, chemical plants, water and sewage treatment plants, structural near salt water and other corrosive environments.
D. Electro-magnetic transparency
FRP are transparent to radio waves, microwaves and other electromagnetic. It is widely used to make antennas.
E. Non-conductive
FRP has low thermal/ electrical conductivity.
F. Dimensional stability
The coefficient of thermal expansion of FRP is slightly less than steel and significantly less than aluminum.
G. Aesthetics
FRP are pigmented throughout the thickness of the part and can be made to virtually any desired custom color. Special surfacing veils are also available to create special surface appearances such as wood grain, marble, granite, etc.
2. FRP I beam girder is manufactured with the pultrusion process after choosing the correct raw materials major including the resin, fibers and additives according to the profiles requirement including mechanical strength, electrical insulation, anti-corrosion etc.
3. FRP I beam girder can meet the customer's requirements by using different combination of resin, fibers and others.
4. FRP I beam girder offers a unique combination of chemical resistance, size stability, high strength, and thermal/electric non-conductivity, etc.
5. FRP I beam girder is extensively suitable for operation platform, equipment platform, stair tread, ditch cover, bridge walkway, supporting for filter filling. In petroleum, chemical, power, offshore prospecting electroplating, marring water and waster water treatment, paper making, brewery and pharmacy industries. It is satisfying load-bearing member in corrosive environment.

view/instance	type	dimension (mm)	approximate weight(g/m)
	I beam	AxBxC
	JLF-I25/15	25x15x4.2	390
	JLF-I38/15	38x15x4.2	490
	JLF-I50/18	50x18x4.5	700
Note: Customer designed profiles is also available.